COLO Manual powder coating systems
CL-181S offers 3 pre set standard application programs for flat parts, profiles and recoating based on COLO more than 15 years experience.
Allows you to create and store your own application programs, optimized for your parts and powder. Each part can be coated always with its ideal settings for experience operator.
A clear and easy to use interface makes it easy for every user to take advantage of these powderful technologies.
Easy for beginners
Powderful for Specialists.
Mains input voltage 100-240 VAC
Operating frequency 50-60 Hz
Input power 50W
Nominal output voltage (to the gun) max. 16 V
Nominal output current (to the gun) max. 1 A
Ambient temperature range 0°C - +40°C (+32°F - +104°F)
Max. input pressure 10 bar / 145 psi
Min. input pressure (while unit in operation) 6 bar / 87 psi
Max. water vapor content of the compressed air 1.3 g/m³
Max. oil vapor content of the compressed air 0.1 mg/m³