Home > Products > Automatic Powder Coating Systems >

Automatic reciprocator for powder coating/Powder painting

Automatic reciprocator for powder coating/Powder painting

Automatic reciprocator for powder coating/Powder painting
CategoriesAutomatic Powder Coating Systems
AlbumView larger image
BrandCOLO powder coating machine
ModelCOLO-2200
ApplicationMoving of automatic spray gun
Voltage110V/220V
Stroke1.5m, 1.8m, 2m , 2.5m
FOB portNINGBO
Terms of PaymentT/T
Download DOC
Update Time2019-10-18
Detail Information
PLC Automatic Reciprocator for Powder Coating/Liquid Coating application
COLO-2200D PLC controlled powder coating reciprcator is newly designed by COLO 10 years experienced, applied in automatic line, it achieves perfect coating result. This reciprocator is electrically driven by belt through a frequency motor, controlled via PLC, giving much more gentle and precise motion comparing with normal reciprocators.

COLO Powder Coating Reciprocator Parameters

Rated voltage
AC220V~240V/50~60Hz
Rated power
0.75Kw
Speed
0.08m/S-0.8m/S (adjustable)
Stroke
1.5m 1.8m 2m 2.5m
Setting system
PLC with touch screen
Speed control method
Frequency conversion
Required temperature
-10~50℃
Automatic reciprocator by sliding rail


Feature of the reciprocator
Could store 20 programs
Easy operation
Smooth and accurate running
Solid and maintenance free
Height or the stroke adjustale and customized 
The programmable two-dimensional and three-dimensional intelligent controllable reciprocator is specially designed to  improve the working efficiency and coating quality. The equipment can meet the highest requirement of coating quality,  as the ideal product for improving surface finishing coating design.
If reciprocator position changed, Z-axis direction would move to Y-axis direction (moving with the production line)
The maximum speed of fore-and-aft direction in Z-axis is 10m/min (the data can be customized based on customer needs),  adjustable within motion stroke range.there is a corresponding motion control according to the detection of part position signal.
Stroke can be adjusted in the controller;each part can be arbitrarily set in the travel range of the upper and lower limited position, while the speed can be set in a certain range. The speed of vertical direction in X-axis can be segment adjustable; 
vertical speed up to 78m/min(the data can be customized based on customer needs).

Product review
  • Loading...