Powder injector 1007 780

The injector is used to convey normal organic powders between the powder hopper and the powder gun. The injector is

supplied with a PTFE insert sleeve as standard. The plug-in injector allows fast cleaning and easy handling because it can be

detached from the powder hopper without using any tools. All connections are plug-in and not interchangeable (when using in

manual equipment). The injector can be disassembled without special tools.

IG06 Powder injector - complete (pos. 1-13) 1007 780

A Conveying air check valve unit (red marking) - complete (incl. pos. 6, 8, 9 and 12) 1005 589

B Supplementary air check valve unit (black marking) - complete (incl. pos. 7, 8, 9 and
13)1005 590

C Injector body - complete (incl. pos. 1, 2, 10 and 11) 1006 530

1 Injector body (without pos. 2) 1006 484

2 O-ring - Ø 16x2 mm 1007 794#

3 Insert sleeve - PTFE, complete 1006 485#

4 Hose connection - Ø 10-12 mm, complete (incl. pos 4.1) 1006 531

4.1 O-ring - Ø 16x1.5 mm 205 141#

5 Threaded sleeve 1006 483

6 Connector (conveying air) - NW 5.5 1004 366

7 Connector (supplementary air) - NW 5.5 1004 367

8 O-ring - Ø 11x1.5 mm 1000 532#

9 Filter element - Ø 9/4x27 mm 1003 698#

10 Nozzle 1006 488

11 Nozzle fixation - complete (incl. pos. 11.1) 1007 792

11.1 O-ring - Ø 8x1 mm 1007 793#

12 Body (red) 1004 369

13 Body (black) 1004 370

16 Conveying air hose - Ø 8/6 mm (red) 103 500*

17 Supplementary air hose - Ø 8/6 mm (black) 103 756*

18 Quick release coupling for conveying air hose - NW5-Ø 8 mm 261 645

19 Quick release coupling for supplementary air hose - NW5-Ø 8 mm 261 637

Powder hose - 66 type, POE, Ø 16/11 mm, with conductive strip (standard) 105 139*#

Powder hose - 74 type, POE, Ø 15/10 mm, with conductive strip 1001 673*#

Powder hose - 75 type, POE, Ø 18/12 mm, with conductive strip 1001 674*#